T130 Auto Smoke Leak Detector EVAP Vacuum Smoke Machine Vehicle Diagnostic Tool V93718

Features: 【Fast Smoke Output】: T130 smoke leak detector equipped with a built-in air pimp and smoke generator, can be generated with 10 seconds with stable and large amount of smoke after switch -on. Full vehicle testing can be completed quickly, significantly reducing diagnostic time. 【Dual Modes Optional】: T130  car EVAP smoke machine have air mode(green) and smoke mode(red). the air mode can help you test whether there is a leak in the pipe by injecting air into the pipe. The smoke mode is to accurately determine the location of the leak through the visible smoke after detecting the leakage of the car, so as to solve the problem of car failure. 【3 Kinds of Display】: Automotive smoke machine equipped with pressure gauge, oil level meter and adjustable flow meter. Visible oil meter and pressure gauge helps you observing the change of the value,  flow meter can adjusting the amount as needed. All data are clear at a glance, which helps you better control the smoke effect. 【Overheat & Anti-frost Protection】: The smoke  is diagnostic tool equipped with the latest intelligent protection device. When the temperature of the device exceeds 80°C or below -15°C, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. 【Widely Application】: EVAP smoke analyzer can be testing for EVAP System, intake system, exhaust system, crankshaft system, fuel tank system, turbo leaks and various pipe fittings. Compatible with all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches, cars, light trucks and speedboats, etc. How to operate? 1. Unscrew the oil filler cap and fill it with 10ml baby oil into the detector for the first time. 2. Connect the car battery, then turn on the air pump and smoke generator. 3. Connect the smoke hose to the pipeline to be tested through the adapter. 4. In about 10 seconds, the leaks can be found according to where the smoke appears.   Caution: 1. When you use this T130 car smoke leak detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range. 2. The testing liquid: both liquid paraffin and baby oil are OK. 3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time. 4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 5. During the process of leak detection, please keep away from smoke-sensitive parts. 6. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 8. The round part of this detector has temperature, please be careful to avoid burns. 9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.